Experiencing problems with your automatic wire cutter and stripper ? Many common issues can be quickly resolved with simple adjustments and maintenance. This guide will help you diagnose and fix the most frequent challenges, ensuring your machine operates efficiently. Unstripped Wire Ends If your machine isn't stripping wire ends properly, first examine the cutting depth. If the cut is too shallow, adjust the wire diameter setting to a larger value. Insufficient pressure from the feeding wheel can also be a culprit; in this case, increase the air pressure. Don't forget to clean the feeding wheel thoroughly, as accumulated dirt can hinder its grip. Finally, review your retraction parameters—they might be set incorrectly (either too large or too small), and always confirm normal air supply to the machine. Issues with Stripping Wire Tails Similar to wire ends, unstripped tails often point to a shallow cutting depth. Try decreasing the wire diameter parameter slightly. A loose wire...
评论
发表评论